Avaya Cajun P580, User Manual, Page: 169 / 770

Document No. 650-100-700, Issue 1 6-11
Using VLANs, Hunt Groups, and VTP Snooping
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Binding Type The binding types are set through the switch ports. See
“
Assigning VLANs to a Port and Associated Issues ” in
Chapter 8 , “ Configuring Ports .”
• Static - when switch ports are added manually and
can be removed
• Persistent - when switch ports are bound to VLANs
automatically but can not be removed. automatically
(i.e., if the binding for a switch port is set to 'Bind to
All').
• Dynamic - when a switch port is assigned to VLAN
using automatic VLAN binding,(i.e. if the binding for
a switch port is set to “Bind to Received”). The
VLAN may be deleted, but if the port VLAN binding
is “Bind to Received”, the VLAN may be re-added
by receiving tagged traffic. This causes the port to
again dynamically bind to the VLAN.
See “ Configuring Switch Ports Settings ” in Chapter 8 ,
“ Configuring Ports ,” for more information.
Frame Format • From Port - causes port to send frames using the
frame format specified in the Trunk Mode attribute of
the corresponding switch port.
• Clear - causes port to send untagged frames on this
port for this VLAN.
Note:
See “ VLAN Introduction ” earlier in this chapter.
Table 6-2. VLAN Switch Port Dialog Box Parameters
Parameter Defines...
2 of 2