JAO; Reviewed:
SPOC 6/1/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
6 of 15
PlantBW500Flare
5. Configure Avaya Aura® Communication Manager
This section covers the station configuration for Flare Experience. The configuration is
performed via the System Access Terminal (SAT) on Communication Manager.
Use the
add station
command to add a station for Flare Experience. Use
9621SIP
for the
Station Type
, provide a descriptive
Name
,
and enable
IP Softphone
. Use the default values for
the other fields on
Page 1
. The SIP station can also be configured automatically by System
Manager as described in
Section 6
add station 46010 Page 1 of 6
STATION
Extension: 46010 Lock Messages? n BCC: 0
Type: 9621SIP
Security Code: TN: 1
Port: IP Coverage Path 1: COR: 1
Name: Flare, Experience
Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Time of Day Lock Table:
Loss Group: 19
Message Lamp Ext: 46010
Display Language: english
Survivable COR: internal
Survivable Trunk Dest? y
IP SoftPhone? y
IP Video Softphone? y
Use the
change off-pbx-telephone station-mapping
command to map the Communication
Manager extensions (e.g., 46010) to the same extension configured in System Manager. Enter
the field values shown. For the sample configuration, the
Trunk Selection
field is set to
aar
so
that AAR call routing is used to route calls to Session Manager. AAR call routing configuration
is not shown in these Application Notes. The
Configuration Set
value can reference a set that
has the default settings.
change off-pbx-telephone station-mapping 46010 Page 1 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station Application Dial CC Phone Number Trunk Config Dual
Extension Prefix Selection Set Mode
46010 OPS - 46010 aar 1