Avaya Aura Communication Manager Branch i120, Installation, Quick Start

Page: 3 / 24

Issue 3 May 2009 1
Introduction
This document contains the information that you need to start using your Avaya Aura™
Communication Manager Branch in the shortest possible time.
1. Check before you install your Communication Manager Branch.
2. Mount your Communication Manager Branch.
3. Ground your Communication Manager Branch.
4. Connect your Communication Manager Branch to your telephones, computers, and
network.
5. Turn on your Communication Manager Branch.
6. Configure . Point your Web browser to https://192.11.13.6.
Congratulations! You are now ready to use your Communication Manager Branch i120.
Check
Safety
Before you start the installation, refer to the following safety information
●
Grounding. Refer to “General grounding requirements” on page 10 .
●
Rack mounting. Refer to “Mounting your Communication Manager Branch i120 in a rack”
on page 4 .
Installation location
When deciding where to position the Communication Manager Branch i120, ensure that:
●
It is accessible and cables can be connected easily.
●
Cabling is away from sources of electrical noise such as radio transmitters, broadcast
amplifiers, power lines and fluorescent lighting fixtures.
●
Water or moisture cannot enter the case of the Communication Manager Branch i120.
●
There is a free flow of air around the Communication Manager Branch i120 and the vents
in the sides of the case are not blocked.