![Avaya 555-233-784 User Manual Download Page 70](http://html1.mh-extra.com/html/avaya/555-233-784/555-233-784_user-manual_3027444070.webp)
Backup/Restore Options
4610SW IP Telephone Options
6-12
Issue 2.0 December 2003
Reinstating the Phone After a Log Off
When your phone is logged off, the top line displays “Ext.=”.
1. To reinstate your phone following a log off, use the dialpad to enter your
Extension Number, then press the Pound (#) key.
The display prompts for entry of your password.
2. Using the dialpad, enter your PBX/switch Password then press the Pound
(#) key.
The phone is now ready for use.
Backup/Restore Options
The 4610SW IP Telephone’s backup and restore options allow you to:
■
Back up your options/preference settings, your Speed Dial button labels,
names, and numbers, and Feature button labels. This occurs automatically
whenever you save a change to any one of those settings or buttons.
Automatic backup protects this data against system failure, by allowing you
to restore your backup file of active settings and button labels.
■
Restore options settings, Speed Dial button labels, names and numbers,
and Feature button labels following a phone failure or replacement.
■
Establish or modify FTP (File Transfer Protocol) settings such as the
network server address, directory path for saving backed-up data, and a
User ID and Password for server access through your phone.
■
Verify whether an automatic backup has occurred.
Because each telephone system has unique characteristics and settings,
modifying the Backup/Restore options usually requires your System
Administrator’s assistance. For example, it is unlikely that you know the specific
Server IP Address to enter when setting up FTP parameters without consulting
your System Administrator.
To verify or change any of the above options, select Backup/Restore from the
third Options Main screen. This displays the Backup/Restore Main screen
containing all related backup/restore options and settings.
NOTE:
On the Backup/Restore Main screen, check the Automatic Backup setting
to determine if your phone is already set for automatic backups. The default
setting is Disabled, meaning automatic backup will not occur unless you
change the setting to Enabled.
Summary of Contents for 555-233-784
