Avaya 4524GT, Configuration Manual

Page: 157 / 362

Variable Value
summer time start/end falls back to the
'last' option.
<end:DAY> Specifies the day of the particular month you
want recurring daylight savings time to end.
<end:MONTH> Specifies the month of each year you want
recurring daylight savings time to end.
<end:hh:mm> Specifies the hour and minute of the
particular day you want recurring daylight
savings time to end.
offset <1-1440> Specifies the time in minutes by which you
want to change the time when recurring
daylight savings begins and ends. The offset
is added to the current time when daylight
saving time begins and subtracted from the
current time when daylight saving time ends.
Values range from 1 to 1440 minutes.
Clock configuration
In addition to SNTP time configuration, a clock provides the switch with time information. This
clock provides the switch information in the instance that SNTP time is not available.
Use the Clock source command to view and configure the clock.
Clock source command
This command sets the default clock source for the switch.
The syntax for this command is
clock source {sntp | sysUpTime}
Substitute
{sntp | sysUpTime}
with the clock source selection.
Run this command in Global Configuration command mode.
Custom Autonegotiation Advertisements
Custom Autonegotiation Advertisement (CANA) customizes the capabilities that are
advertised. It also controls the capabilities that the Avaya Ethernet Routing Switch 4500 Series
advertises as part of the auto negotiation process.
General switch administration using ACLI
Configuration — System April 2011 157