Avaya 4524GT, Configuration Manual

Page: 155 / 362

Variables Description
date Indicates that daylight savings time you
set to start and end on the specified
days every year.
day Date to start daylight savings time.
month Month to start daylight savings time.
year Year to start daylight savings time.
hh:mm Hour and minute to start daylight
savings time.
day Date to end daylight savings time.
month Month to end daylight savings time.
year Year to end daylight savings time.
hh:mm Hour and minute to end daylight
savings time.
offset Number of minutes to add during the
summer time.
zone The time zone acronym to be displayed
when daylight savings time is in effect.
If it is unspecified, it defaults to the time
zone acronym set when the time zone
was set.
set daylight savings time example
clock summer-time BST date 28 Mar 2007 2:00 30 Aug 2007 15:00 +60
This command sets the daylight savings time to begin at 02:00 on March 28, 2007 and end on
August 30th, 2007 at 15:00. The change to daylight savings moves the clock forward by 60
minutes and "BST" will be displayed as the time zone acronym. These changes to and from
daylight savings time will happen automatically.
Configuring recurring daylight savings time
Use this procedure to configure the daylight saving time start and end times for a single
occurrence or to recur annually.
1. In ACLI, set the global configuration mode.
2. Enable the SNTP server.
3. Set the date to change to daylight savings time.
clock summer-time recurring (<startWeek:1-5>|last}
<start:DAY> <start:MONTH> <start:hh:mm> {<endWeek:1-5>|last}
<endDAY> <end:MONTH> <end:hh:mm> [offset <1-1440>]
General switch administration using ACLI
Configuration — System April 2011 155