Avaya 4524GT, Configuration Manual

Page: 152 / 362

sntp server primary address [<ipv6_address> | <A.B.C.D>]
Run the
SNTP server primary address
command in Global Configuration command
mode.
The following table describes the parameters for this command.
Table 67: SNTP server primary address parameters
Parameters and
Variables
Description
ipv6_address Enter the IPv6 address of the primary NTP server.
<A.B.C.D> Enter the IP address of the primary NTP server in dotted-
decimal notation.
SNTP server secondary address command
The
SNTP server secondary address
command specifies the IP addresses of the
secondary NTP server.
The syntax for the
SNTP server secondary address
command is
sntp server secondary address [<ipv6_address> | <A.B.C.D>]
Run the
SNTP server secondary address
command in Global Configuration command
mode.
The following table describes the parameters for this command.
Table 68: SNTP server secondary address parameters
Parameters Description
ipv6_address Enter the IPv6 address of the secondary NTP server.
<A.B.C.D> Enter the IP address of the secondary NTP server in dotted-
decimal notation.
No SNTP server command
The
no SNTP server
command clears the NTP server IP addresses. The command clears
the primary and secondary server addresses.
The syntax for the
no SNTP server
command is
no sntp server {primary | secondary}
Run the
no SNTP server
command in Global Configuration command mode.
System configuration using ACLI
152 Configuration — System April 2011