Avaya 4524GT, Configuration Manual

Page: 122 / 362

Displaying the IPv6 neighbor information
Use the following command to display IPv6 neighbor information:
Enter the following command to display the address and status of the neighbor
cache.
show ipv6 neighbor [<ipv6_address>] [type {other | dynamic |
static | local}]
Job aid
The following graphic shows the output of the
show ipv6 neighbor
command.
4526(config)#show ipv6 neighbor
=======================================================================================
Neighbor Information
=======================================================================================
NET ADDRESS/ PHYSICAL ADDRESS PHYS INTF TYPE STATE LAST
UPD
------------------------------------------------------------------------------------------------------------------------------------------------------
3000:0:0:0:0:0:0:0/ 00:11:F9:34:88:00 V-1 LOCAL REACHABLE 0
3000:0:0:0:0:0:0:1/ 00:01:02:03:04:05 1/5 STATIC REACHABLE 387452
3000:0:0:0:0:0:0:99/ 00:11:f9:34:88:00 V-1 LOCAL REACHABLE 385251
fe80:0:0:0:211:f9ff:fe34:8800/ 00:11:f9:34:88:00 V-1 LOCAL REACHABLE 385193
Displaying IPv6 interface ICMP statistics
Use the following procedure to display IPv6 interface ICMP statistics:
Enter the following command:
show ipv6 interface icmpstatistics [<1-4094>]
Job aid
The following graphic shows a sample of the results from the
show ipv6 interface
icmpstatistics
command.
System configuration using ACLI
122 Configuration — System April 2011