manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 86

 

86

     Avaya 374x DECT Telephones - User Guide

02/2016

Information is stored in the “Messaging” inbox until all voice mail messages have been listened 
to. See 

 Checking the voice mail inbox

 on page 65. 

Check the Voice Mail inbox

1. Enter the menu by pressing "Menu".

2. Select 

 

 in the menu.

3. Select “Inbox”. The voice mail is displayed first in the inbox list.

4. Select the message with the icon 

 in front of the message (a voice mail is always 

displayed first in the inbox list). Only one voice mail at the time is displayed even if there 
are more voice mail messages in the message list.

5. Press "View".

6. Press "Call", or 

.

One Key Voice Mail Access

A long press on 

 in idle mode will call the voice mail. If the extension number is not 

available, a dialog window "Voice mail number not defined" is displayed. 
Some systems require that the mailbox extension number is downloaded to the handset, see 
the handset’s Configuration Manual.

My favourites

With this menu it is possible to customize your own menu with services/functions that are used 
often. A list of predefined services/functions are available for example; Write new message, 
Central phonebook, Call contact, etc. 

Tip:

Tip:

If configuring the Phone call function, it is possible to add a variable/character U 
in the Enter number field that allows the user to enter additional numerical 
characters before calling the number. See 

 Admin menu

 on page 109 for more 

information.

Adding favourites

1. Enter the menu by pressing "Menu".

2. Select 

 

 in the menu.

3. Select "Add new".

4. Enter a name of the service in the field, and then press "OK"

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands