manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 57

Calling

Avaya 374x DECT Telephones - User Guide

02/2016     

57

Dialing a name from the central phonebook

1. Open the menu by pressing the "Menu" soft key.

2. Select  . 

3. Select "Central phonebook".

4. Select "Search by name".

5. Enter the first name, last name, or both.

6. Note: Incomplete names may be entered and searched. Names that include spaces may 

be also be searched.

7. Press “Search”. 

8. Press "Call", or 

 to make the call.

During a call

NOTE: 

Some of these functions are system dependent. The parameters are set up in the 

PDM/Device Manager, see the handset’s Configuration Manual, and Installation and 
Operational Manual for PDM/Device Manager. 

If the handset is configured via PDM/Device Manager, one of the predefined emergency numbers can be 
called while the handset or keypad is locked. When calling from a locked handset, only the Microphone 
on/off function can be accessed by pressing the soft key "More". However, the entire In Call menu is 
accessible when calling from a handset with locked keypad.

Adjusting the volume during a call

Note:

Note:

Press 

to increase the volume, and 

 to decrease the volume. The handset stores and 

preserves the new volume level. The   and   on the navigation key can also be used to adjust the 
volume.

Opening contacts during the call

1. Press "More" during the call.

2. Select "Contacts".

3. Select "Call contact" for searching a local or company phonebook contact, or select 

"Central phonebook" for searching a central phonebook contact.

4. Select or search contact.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands