54
Avaya 374x DECT Telephones - User Guide
02/2016
Calling
Incoming call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a notice of a
call. Ring signal and vibrator can be disabled, see
The calling party’s handset number or name is shown. The name is shown if the calling party’s
handset number is stored in the local phonebook.
NOTE:
If the parameter
Stimuli call phonebook lookup
is disabled, the system-provided call
information is used instead. This means that if a calling party’s name is saved in the phonebook, it will
not be displayed. This function is only applicable in legacy systems (stimuli).
Answering a call
When the signal sounds, press
to answer the call, or press
to answer the call in
loudspeaking mode
1
. The name or number of the calling party is displayed if calling line
information is available.
Tip:
Tip:
When a headset is connected to the handset, the headset button can be used to
answer the call. I
A call may also be answered in the following ways:
●
Automatically and Loudspeaking: When Automatically is enabled, all incoming calls are
connected automatically. See
●
With a predefined message. This lets the use decline the call, but still acknowledge its
receipt, by sending a predefined text message to the caller. See
Message with a Predefined Message
Declining a call
Your telephone rings.
1. Press
On-hook
key to decline the call.
Note:
Note:
A priority call cannot be declined.
1. When Bluetooth is enabled, the loudspeaker audio is lowered due to current limitations in the intrinsically safe handset.
