manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 106

 

106

     Avaya 374x DECT Telephones - User Guide

02/2016

In Charger Action when in Call

It is possible to determine actions to be performed when a handset is placed in charger during a 
call.

1. Enter the menu by pressing "Menu".

2. Select  in the menu.

3. Select "In charger".

4. Select "Call behavior".

5. Select one of the following:

●

No action - no action is performed when handset is placed in charger during a call.

●

Loudspeaking - The loudspeaker is activated when handset is placed in charger 
during a call.

●

End call - The call is disconnected when handset is placed in charger.

In Charger Action when not in Call

It is possible to determine actions to be performed when a handset is not in call and placed in 
charger.

1. Additional In charger actions can also be configured, see the handset’s Configuration 

Manual.

2. Enter the menu by pressing "Menu".

3. Select 

 in the menu.

4. Select “In charger”.

5. Select "Other actions".

6. Select one of the following:

●

No action - no action is performed when handset is not in call and placed in charger.

●

Switch off - When the handset is placed in the charger it will switch off. When it is removed 
from the charger it will switch on again.

●

Sound off

1

 - The handset is muted when placed in the charger. When it is removed from 

the charger it switches on the sound again. NOTE: Messages with breakthrough, for 
example high or alarm priority, is not muted.

●

Redirect - Calls can be redirected to another extension when the handset is placed in a 
charger. This function must be programmed in the PBX to be able to redirect calls.

1.  If the parameter Possible to turn off sound is set to "No" in PDM/Device Manager, the handset is not muted in charger.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands