Avaya 374 DECT Series Manual Download

Page: 85 / 133

Settings

Sound and alert settings

Adjusting the ring volume

Procedure

1. Press

Menu

2. Select

Settings

3. Select

Sound & Alerts

Volume

Increase and decrease the volume using the left and right arrows on the navigation key.

4. Press

Back

to save the settings.

Note:

If a handset restriction is enabled, it might not be possible to set the ring signal to

Silent

Setting different ring signals for calls

About this task

Use this procedure to set different ring signals for calls.

The handset has 14 different ring signals.

Procedure

1. Press

Menu

2. Select

Settings

3. Select

Sound & Alerts

Ring signals

4. Select one of the following:

•

Internal call

•

External call

•

Call back

•

Priority call

5. Select the ring signal.

(Optional)

Press

Play

to listen to a ring signal before selecting it.

The ring signal is repeated until you press

Stop

7. Press

Back

to save the settings.

Settings

July 2017

Using Avaya 374x DECT handsets connected to Avaya Aura

™

Communication

Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 374 DECT Series






































































































































Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands

Avaya 374 DECT Series, Manual

Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands