Avaya 374 DECT Series Manual Download

Page: 121 / 133

4. Put the headset in pairing mode and press

The handset starts searching for the headset.

5. The headset is displayed in the handset menu Headset found. Press

Select

to select the

headset.

The pairing starts.

6. A PIN-code is requested for the

Bluetooth

headset. Enter the PIN-code and press

Select

The system displays the message

Pairing successful

7. The paired headset is displayed in the handset menu Headset. When pairing a new headset

it is automatically connected and will be used for calls.

Adding another Bluetooth headset

You can configure up to four headsets to the handset, but you can select only one at a time. To pair

another headset repeat section Pair and Connect a headset steps 1-6.

The paired headsets are displayed by a default name in the handset menu as

Headset

. Confirm

with

Select

Selecting a Bluetooth headset

Procedure

1. Press

Menu

2. Select

Connections

3. Select

Bluetooth

Headset

4. Select a headset by pressing up or down on the navigation key.

5. Press

Select

The system displays the message:

Connection successful is displayed

The headset is selected.

When a new headset has been selected any previous headset automatically gets
disconnected.

Adding another

Bluetooth

headset

July 2017

Using Avaya 374x DECT handsets connected to Avaya Aura

™

Communication

Manager and IP Office

121

Comments on this document? [email protected]

Summary of Contents for 374 DECT Series






































































































































Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands

Avaya 374 DECT Series, Manual

Search results

Summary of Contents for 374 DECT Series

Reviews:

Related manuals for 374 DECT Series

Brands by name

Popular brands