Chapter 7: Procedure call
About this task
When configuring the functions
Call services
,
In Call
menu,
Contacts
, or a shortcut or service to
the
Phone call
function, the data added in these functions is static. When entering the data for the
function to be used, it is possible to add a variable or character U that allows the user to enter
additional numerical characters before calling the number or sending the data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix must
be added to a phone number. In this case, the user can pre-program the prefix and then enter the
applicable phone number when using the Phone call function.
Procedure
1. Press
Menu
, or the confirmation button.
2. Select
My Favorites
.
3. Select
Add new
.
4. In the Name field, enter
Call no
and press
OK
.
5. Select the function
Phone call
.
6. In the
Number
field, enter the prefix to be used followed by the character
U
. In this case, the
text string is as follows *21*U. The character U represents an Enter number dialog where the
user can enter the phone number.
7. Press
Save
.
When using the function, an Enter number dialog appears, see figure below. If the user
enters
123
(or selects a contact with this number by pressing the
Call Contact list
(
) and
presses
OK
, the number *21*123 is dialed. Note that no call is established before the user
presses
OK
, that is, post-dial.
July 2017
Using Avaya 374x DECT handsets connected to Avaya Aura
™
Communication
Manager and IP Office
103
