Avaya 3735 User Manual Download

Page: 86 / 135

Inbox

Reading a stored message

Procedure

1. Press

Menu

2. Select

Messaging

3. Select

Inbox

to view the message list.

4. Select a message, and then press

View

You can scroll the message list with the up and down arrows on the navigation key.

Replying to sender

Procedure

1. Press

Menu

2. Select

Messaging

3. Select

Inbox

to reply to the message.

4. Press

Reply

5. Write your message, and then press

Send

(Optional)

If required, edit the number to the receiver and press

Send

Deleting a message

Procedure

1. Press

Menu

2. Select

Messaging

3. Select

Inbox

to view the message list.

4. Select a message that you want to delete, and then press

More

You can scroll the message list with the up and down arrows on the navigation key.

5. Select

Delete

, and then press

Yes

The system deletes the message.

(Optional)

To delete all messages in the list, select

Delete all

and press

Yes

Forwarding a message

Procedure

1. Press

Menu

2. Select

Messaging

Menu operation

August 2019

Using 3735 DECT handsets with Communication Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 3735








































































































































Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands

Avaya 3735, User Manual

Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands