Avaya 3735 User Manual Download

Page: 68 / 135

Managing Mid-call operations

During a call

When you call from a locked handset, there are limitations to what items in the

In Call

menu are

visible. However, the entire menu is accessible when calling from a handset with locked keypad.

Adjusting the volume during a call

About this task

Use this procedure to increase or decrease the volume during an ongoing call.

Procedure

Do the following:

• To increase the volume, press the

Volume up

button.

• To decrease the volume, press the

Volume down

button.

• To adjust the volume using a navigation key, press up or down on the navigation key.

The handset stores and keeps the new volume level.

Opening contacts during the call

About this task

Use this procedure to open contacts while you are on a call.

Procedure

1. Select

More

2. Select

Contacts

3. To open the contacts, select any of the following:

•

Call contact

: For searching a local or company phone book contact.

•

Central phonebook

: For searching a central phone book contact.

4. Press

Select

5. Select or search contact.

The selected contact can be called by pressing

Call

. When calling the contact, the first call

is put on hold.

Opening messaging during the call

About this task

Use this procedure to open the

Messaging

menu during an ongoing call.

Menu operation

August 2019

Using 3735 DECT handsets with Communication Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 3735








































































































































Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands

Avaya 3735, User Manual

Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands