Avaya 3735 User Manual Download

Page: 61 / 135

Viewing missed calls

About this task

By default the system displays the Missed call window and the

Missed calls

(

) icon.

The dialog window that appears for a missed call can be turned off. The handset can also be

prevented from storing calls in the call list. The

Call list

can be used to ensure privacy for users

sharing the same handset. These features require configuration in the handset via

WinPDM

Device Manager

Figure 3: Missed calls

Procedure

The system displays a Missed call window and the

Missed calls

(

) icon.

1. To view the missed calls, press

Yes

The user presses

2. Press

Menu

3. Select

Calls

Missed calls

4. To scroll in the list, press up and down on the navigation key.

5. To call back, press

Call

(Optional)

In a

Call list

, press

More

to view the time and date of the call, edit the received

number, add to contacts, and delete the received number.

If supported by the system, the numbers contact name is displayed in the list.

Viewing the time of a call

Procedure

1. Press

Menu

Managing call list

August 2019

Using 3735 DECT handsets with Communication Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 3735








































































































































Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands

Avaya 3735, User Manual

Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands