Avaya 1616 User Manual Download Page 107

Page: 107 / 214

1608/1616 Phone User Guide

Page 107

15-601040 Issue 11c (Thursday, April 16, 2020)

IP Office

Comments on this document? [email protected]

Voicemail: Sending a Message

13.4 Mailbox Greeting

While the voicemail system will play a generic greeting to caller, prompting them to leave a message, you can
record your own greeting.

1. Press the

MESSAGES

button. Depending on how your system is configured, you may be required to

enter your voicemail password and then press the

Done

soft key. The visual voice menu is displayed.

2. Use the

up and down

arrow keys to scroll to the option

Greeting

2. Press the

Select

soft key or

3. Use the soft keys to listen to and record your mailbox greeting.

Listen

Listen to the current greeting or the new greeting just recorded.

Record

Record a new greeting. Note that the greeting must be at least 3 seconds long or the voicemail system
will discard it.

More

Switch between the different sets of available soft key functions.

Submit

Submit the new recording as your mailbox greeting.

Delete

Delete your current mailbox greeting. The voicemail will use its default greeting.

Summary of Contents for 1616























































































































































































































Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands

Avaya 1616, User Manual

Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands