Avanti MBD5L, Instruction Manual

Page: 13 / 38

13
OPERATING YOUR MINI PUB
¾
Setting the Temperature
You will need to set the temperature to best suit your taste.
The temperature can be set from 38º to 54ºF (3° to 12°C), using the temperature selectors (
and
) located below the temperature display.
When you push the two buttons for the first time, the LCD readout will show the original temperature
set at previous time (the temperature preset at the factory is 42ºF (6ºC)).
¾
Interior LED Light
The
Mini Pub is also equipped with an interior LED light, that can be turned ON or OFF by pressing
the third button below the temperature display.
¾
LCD Temperature Display
If you wish to turn the temperature display ON or OFF, press and hold the light button for
approximately 5 seconds this will turn the display OFF and it will remain off until you
press any of the buttons again.
¾
Dispensing Your Beer
•
Always use clean glasses rinsed with very cold water at the time of serving. Impurities prevent the
foam from forming in the glass.
•
Hold the glass under the dispensing tap, making sure that its end-piece is not in contact with the
glass.
•
Pull the dispensing tap handle towards you while holding the glass inclined at a slight angle. The
quantity of foam depends on the glass inclination. Set the glass upright as the beer level rises.
•
Return the tap handle to its original position when the foam reaches the glass brim. The beer will
stop flowing.
You can select temperature display setting from Fahrenheit to Celsius degree by pressing and holding
the
button for approximately 5 seconds. Fahrenheit or Celsius degrees indicator will appear in
white color in the LCD temperature display window with blue background.