Avanti MBD5L, Instruction Manual

Page: 12 / 38

12
•
Connect the hose by inserting it into the hose outlet (to check that the hose is correctly
connected, try to remove it by slightly pulling it. Resistance indicates that the hose is correctly
connected. In order to disconnect the hose, push in the metallic collar on the hose outlet while
pulling the hose). See below.
•
Place the entire assembly on the support base provided in the specific compartment on the
right-hand side of your
Mini Pub .
b) 340 gram cylinder (Accessory item, sold separately)
•
A 340 gram cylinder can be ordered and will dispense up to twenty 5L kegs.
•
Open the side panel compartment located on the right-hand side of your Mini Pub so as to
reveal the gas cartridge housing.
•
Make sure that the pressure gauge valve is shut (to shut the valve, turn it
counterclockwise).
•
Screw the gas cartridge on the pressure gauge until fit is tight and firm.
•
Connect the hose by inserting it into the hose outlet (to check that the hose is correctly
connected, try to remove it by slightly pulling it. Resistance indicates that the hose is correctly
connected. In order to disconnect the hose, push in the metallic collar on the hose outlet while
pulling the hose). See below.
•
Place the assembly into the housing provided, making sure that the pressure gauge dial is in
front of the window and close the hatch.
Adjusting the gas pressure
Beer type CO2 content in % Pressure in bar approx. 5°C
German beers +/- 0.5 +/- 0.4 à 0.5 bars
French beers +/- 0.6 à 0.8 +/- 0.8 bars
Very fermented brown ales +/- 0.6 à 0.8 +/- 0.8 à 1 bars