avantec DT910, User Manual, Page: 7 / 24

7
After entering the list, press the / key to scroll through the entries
and pick a number that you wish to call, then press
key twice to
confirm. The selected number will be dialed out automatically.
4.4 Making Internal Calls (Intercom)
If you have two or more handsets registered to a base station, it’s
possible to make internal calls between handsets.
1.
In standby mode, press key to enter
the handset menu, “ INTERCOM ” is
displayed.
2. Press key to confirm.
3. Press / key to select the handset
number that you wish to call.
4. Press key to dial out.
Note: The handset number is normally shown on
the display “HANDSET X” during standby.
4.5 Call Transfer
To transfer an external call to another handset, please follow the steps
below:
1.
During conversation (external call), press
key, call menu is displayed.
2. Press / key to scroll through until
“ INTERCOM ” is displayed.
3. Press key to enter the INTERCOM
menu, “ INT ALL ” is displayed.
4. Press / key to select the handset
number that you wish to call and then press
key to confirm.
The selected handset will start ringing. As soon as the call is being
picked up, an internal call is established between two handsets while
the external call is being put on HOLD.
Press
key to terminate the active internal call and the external call
will be automatically transferred to the intended handset.