AVANT 735 2020, Operator'S Manual

Page: 102 / 140

Service and maintenance Avant 735
102
.
Installing of service support and frame
lock
Installing boom service support:
The red service support of the boom lift cylinder is
located at the tip of the boom, behind the attachment
coupling plate.
Make sure that the boom stays up during
maintenance operations by putting the service
support on the lift cylinder piston rod. Secure the
service support by locking it on the piston rod with
the long screw that is on the support.
Service support stored at the tip of the boom
Service support in place
Frame lock:
A red frame lock bar is stored under the operator's
cab.
This lock bar is intended to lock the articulated frame
to make the loader frame stay straight during e.g.
lifting or transportation.
The holes for the frame lock bar are on the left side
of the loader, below the access step.
1.
Slide the hook type end of the bar through a
hole on the rear frame of the loader.
2.
Turn the bar towards the front hole. The other
end should remain locked in the hole on the
rear frame.
3.
Align the holed end of the bar and the frames
by turning the steering wheel. This can be
done without starting the loader.
4.
Once aligned, slide the bar and lock with its
cotter pin.