Avant Tecno Oy Avant 850, Operator'S Manual

Page: 102 / 138

Service and maintenance Avant 850
102
.
Daily maintenance and inspections

Do a walk-around check of the loader before each working shift. Complete the tasks listed below daily before
starting to use the loader and after each 10 working hours.

Check at least the following listed points. Do not use the loader if you notice problems with any of the listed
items, or in other parts of the loader. See the following pages for detailed description of each inspection listed
below.

Adjust the seat and mirrors (if fitted) so that you have a good working position and unrestricted field of vision
from the driver’s seat. Check that windows and mirrors are clean.

Check that all controls of the loader function correctly.
Daily and weekly inspections
Check before
each work
shift
Check
weekly
1
Add fuel
￭ ￭
2
Check the general condition of the loader, its equipment, and safety labels
● ●
3
Clean the loader
￭
●
4
Add grease to the lubricating points
￭
●
5
Check the boom and other metal structures visually
● ●
6
Check tightness of bolts, nuts and fittings
● ●
7
Check wheels
● ●
8
Check the attachment and the quick coupling plate
● ●
9
Check hydraulic oil level
￭
●
10
Check engine oil level
￭
●
11
Check engine coolant level
￭
●
12
Check water separator
￭
●
13
Check engine air filter element
￭
●
14
Check battery and electric cables
● ●
15
Check air filter of cab
￭
●
16
Test the movements of boom
● ●
17
Test drive control and steering
● ●
18
Test parking brake
￭
●
19
Calibrate load sensor if counterweights are added or removed
￭ ￭
●
Maintenance operation
￭
When necessary