Avalue Technology ECM-WHL, User Manual, Page: 36 / 77

ECM-WHL
User’s Manual
36 ECM-WHL
User’s Manual
3.6.2.1 Connectivity Configuration
Item Options Description
CNVi Mode
Disable Integrated
Auto Detection [Default]
This option configures Connectivity. [Auto
Detection] means that if Discrete solution is
discovered it will be enabled by default. Otherwise
Integrated solution (CNVi) will be enabled; [Disable
Integrated] disables Integrated Solution. NOTE:
When CNVi is present, the GPIO pins that are used
for radio.
Discrete Bluetooth Module
Disabled [Default]
Thunder Peak
Seriallo UART0 needs to be enabled to select BT
Module.