Avalue Technology ECM-KBLU User Manual Download Page 37

Page: 37 / 79

User’s Manual

ECM-KBLU

User’s Manual

3.6.1.1 System Language

This option allows choosing the system default language.

3.6.1.2 System Date

Use the system date option to set the system date. Manually enter the day, month and

year.

3.6.1.3 System Time

Use the system time option to set the system time. Manually enter the hours, minutes and

seconds.

Note:

The BIOS setup screens shown in this chapter are for reference purposes

only, and may not exactly match what you see on your screen.

Visit the Avalue website (

www.avalue.com.tw

) to download the latest

product and BIOS information.

3.6.2 Advanced Menu

This section allows you to configure your CPU and other system devices for basic operation

through the following sub-menus.

Summary of Contents for ECM-KBLU
















































































Search results

Summary of Contents for ECM-KBLU

Reviews:

Related manuals for ECM-KBLU

Brands by name

Popular brands

Avalue Technology ECM-KBLU, User Manual

Search results

Summary of Contents for ECM-KBLU

Reviews:

Related manuals for ECM-KBLU

Brands by name

Popular brands