Avalue Technology ECM-EHL, User Manual, Page: 59 / 78

User’s Manual
ECM-EHL
User’s Manual
59
Port 1
Enabled [Default]
Disabled
Enable or Disable SATA Port.
Spin Up Device
Enabled
Disabled [Default]
If enabled for any of ports Staggerred Spin Up
will be performed and only the drives which
have this option enabled will spin up at boot.
Otherwise all drives spin up at boot.
SATA Device Type
Hard Disk Drive
Solid State Drive [Default]
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
SATA Port 1 DevSlp
Disabled [Default]
Enabled
Enable/Disable SATA Port 1 DevSlp. For
DevSlp to work, both hard drive and SATA
port need to support DevSlp function,
otherwise an unexpected behaviour might
happen. Please check board design before
enabling it.
3.6.3.2.3 USB Configuration
Item Options Description
XHCI Compliance Mode
Disabled [Default]
Enabled
Option to enable Compliance Mode. Default is
to disable Compliance Mode. Change to
enabled for Compliance Mode testing.
USB3 Link Speed Selection
GEN1
GEN2 [Default] ,
This option is to select USB3 Link Speed
GEN1 or GEN2.
USB Port Disable Override
Disabled [Default]
Select-Per-Pin
Selectively Enable/Disable the corresponding
USB port from reporting a Device Connection
to the controller.