Avalue Technology ECM-APL2, User Manual, Page: 53 / 69

User’s Manual
ECM-APL2
User’s Manual
53
3.6.3.4.3 SATA Drivers
Item Option Description
Chipset SATA
Enable [Default]
Disable
Enables or Disables the Chipset SATA
Controller. The Chipset SATA controller
supports the 2 black internal SATA ports (up
to 3Gb/s supported per port).
Aggressive LPM Support
Disabled [Default]
Enabled
Enable PCH to aggressively enter link power
state.
Port 0/1
Disabled
Enabled [Default]
Enable or Disable SATA Port.
SATA Device Type
Hard Disk Drive [Default]
Solid State Drive
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
SATA Port 0/1 DevSlp
Disabled [Default]
Enabled
Enable/Disable SATA Port 0/1 DevSlp.
Board rework for LP needed before enable.