AV TOOL AVT-3400, Instruction Manual

Page: 9 / 22

9
Also study the drawing below so you can become familiar with the possible base
band connections to the unit should you wish to use DVDs, VCRs, Camcorders
or TV based games with the unit.
Typical Base Band Signal Sources
4.1 Connecting the AVT-3400 to an Antenna

Take the AVT-3400 from the shipping carton and place it upright or
horizontally next to your CRT or LCD display.

Connect the Antenna or CATV cable to the “CABLE IN” of the back
panel of the AVT-3400.

Connect the HD-15 VGA Cable from the CRT or LCD display to the
HD-15 VGA connector labeled to “TO MONITOR” on the back panel of
the AVT-3400.
NOTE: Fasten the HD-15 screws. It is very important to fasten the
screws. Loose connections can cause distortion of the Picture.

Take the 3.5mm connector from your Multimedia speaker and connect
it to “SPEAKER” on the back panel of AVT-3400.

Take the AC/DC adaptor from the shipping carton and connect the
Adaptor first to the +12 VDC input on the AVT-3400 and then to the AC
socket.

Turn on the Power to the AVT-3400 and to the CRT or LCD.

Press the input button on the AVT-3400 to select between TV and PC
input.
Front View
DVD/VCD
HiFi-
VCR
Camcorder
GAMECUBE
TM
PS2
TM
X-Box
TM