AV TOOL AVT-3400, Instruction Manual

Page: 20 / 22

20

Using the arrow buttons, move the cursor to the position on the matrix
where you want to store the favorite channel.

Use the c/- arrow buttons to select the desired channel.

Press the FC Memo key again to store the channel in the list.

Continue selecting matrix positions and channels using the same
procedure as explained above.

Press the Exit button to return to regular operation of the AVT-3400.
FC Scan Button: If you press this button, you will enable a display of the
previously programmed Favorite Channels. Use the numeric buttons or the
C/- buttons to select the channel you wish to view. If you decide to not
make a selection, pressing the Exit button cancels the operation.
6.0 TROUBLESHOOTING
Most problems with the AVT-3400 are caused by improper use of the Menu
Functions. Make certain that you understand the Menu Function you are invoking
before you attempt to execute it. As suggested above, do not use the Resolution
Function at all unless you completely understand what it does and also know for
certain the maximum resolution possible on your monitor.
Other suggestions:
Determine that the AC outlet into which you have plugged the AC adapter is
furnishing power properly and also make certain that all connections, including
the DC power lead from the AC adapter are fully plugged in to the AVT-3400.
Check that the devices connected to the AVT-3400 are performing properly
before you assume that the AVT-3400 is at fault.
Another problem with the AVT-3400 revolves around the cables. Inspect the
cables for loose connectors or cable damage such as crushed cables or cables
with cuts or nicks. Replace any cable exhibiting these problems.
You also must use the highest quality cables if you want to achieve the best
results. Poor quality cables will cause poor quality signals.
After trying the above suggestions should the problem still persist, contact your
dealer for additional suggestions before contacting AV Toolbox. Should the
dealer’s technical personnel be unable to assist you, contact AV Toolbox via our