85
•
Set the Avio settings location to “SD” or “USB”, depending on the data carrier that contains
the backup. Then the player will read the Avio settings from this location and changes in the
Avio configuration will also be stored here.
OR
•
Copy the Avio settings from the data carrier to the internal storage, if the player should store
the Avio settings here. To do this, choose “SD” or “USB” (depending on the data carrier that
contains the backup) as Backup Source. The Backup Destination must be set to “Internal”.
Click [Backup Now] and the Avio settings will be copied from your data carrier to the internal
storage.
17.
TROUBLESHOOTING
DISPLAY TURNS BLACK AND THEN SHOWS THE SETTINGS SCREEN AFTER SD CARD WAS
INSERTED
1.
Please verify that the SD Card is recognized correctly by the player. Insert it until it snaps in
the slot.
2.
Are you using a
? If yes, remove the playlist from the SD Card and insert it again. If the
player then starts to play your media files, some of the syntax in the playlist is wrong.
3.
If your media files won’t play without a playlist, please check if the file formats and codecs
match the
LAST ITEM OF PLAYLIST DOES NOT SHOW UP
If all playlist items work fine but the last one is always skipped, please make sure that the last line in
your playlist.txt file is terminated by pressing the ENTER key.
Furthermore, every item must be separated from the next item by a blank line. No blank lines are
allowed between the individual parameters.
