69
14.1.2.
SERIAL OUT VIA AVIO
When using a UHD Player with an Avio PRO License (you can check the license
on the player’
s initial
Avio Settings screen
—
), Avio can be used to send out serial messages via the RS232 interface
from your UHD Player to other devices
,
instead of only receiving serial messages.
Every UHD Player can be updated to an Avio Pro License. Please contact the AV Stumpfl Sales
department.
The RS232 interface needs to be configured to be able to send serial messages. Click on [ADVANCED
SETTINGS] in the menu bar of the Web Interface and then on [Peripheral Devices].
Fig. 52: Peripheral Devices settings in the Web Interface
[Serial Device]
Please choose “Avio” from the drop
-down list. If this option is not available, your player does not
have the Avio Pro License. In this case, please contact AVStumpfl to upgrade your Avio license.
[Baud Rate]
This baud rate setting only affects the RS232 interface when it is used as Input (see
section). As soon as the interface is controlled via AVIO, the baud rate needs to be set up in the AVIO
driver.
Please confirm your changes by pressing [Apply Settings] at the bottom of the page.
For further information on how to work with Avio, please refer to the Avio manual (in progress).
In the initialization file (“UHDPlayerSetting.ini”)
,
the settings for the player’s peripheral devices can
be found at the lower end.
Fig. 53:
Peripheral Devices options in the Initialization File
For more information about how to handle the initialization file
,
please refer to
