60
A pop-up dialog will appear, informing you that the playback will be suspended. Confirm this to
proceed with the SD Card scan.
Fig. 44: Pop-up dialog after [Update Content] button was clicked
12.
HDMI INPUT
on the rear panel enables you to use an external video/audio source as (live)
input. The external video/audio source may then be displayed just like media content that is stored
on the attached data carrier.
The HMDI Input port supports incoming video signals up to UHD 3840x2160@60p.
Connect your HDMI video/audio source to the HDMI
I
nput port. To include this HMDI input in your
Assign an incoming HDMI video or audio signal to a playback item from your playlist by using the
playlist entry “HDMI INPUT” instead of “File=”. Contrary to video or audio files in your playlist, it is
obligatory to define the display time for this HDMI Input.
The complete entry in the playlist should look like this:
[ITEM <no.>]
HDMI-INPUT
Displaytime=<seconds>
EXAMPLE 1:
[ITEM 0]
File=test.mp4
[ITEM 1]
HDMI-INPUT
Displaytime=600
The playlist starts with the video file “test.mp4”. Afterward
,
the HDMI Input is displayed for 600
seconds.
EXAMPLE 2:
[ITEM 1]
HDMI-INPUT
Displaytime=-1
The playlist perpetually displays the HDMI Input.
