AV Link WAV-LJ, User Manual, Page: 1 / 2

AV EXTENDER
WAV-LJ
(Local)
WAV-RJ
(Remote)
U
SER
M
ANUAL
V1.0
Package Contents for WAV-EJ
ƒ WAV-LJ Local Unit
ƒ WAV-RJ Remote Unit
ƒ 1 user manual
ƒ 2 power adapter DC 12V/600mA
ƒ 1 VGA 1.2M cable (HD-15 Male to Male)
ƒ 1 Audio 1.2M cable
ƒ
2 captive screw connectors
ƒ 4 M4*10mm screws
ƒ 4 P6*14mm screws
Package Contents for WAV-RJ
ƒ WAV-RJ Remote Unit
ƒ 1 user manual
ƒ 1 power adapter DC 12V/600mA
ƒ 1 captive screw connector
ƒ 2 M4*10mm screws
ƒ 2 P6*14mm screws
Anything missed, please contact with your vendor.
Features
ƒ The extension of video and audio signal up to 300
meter away by using the VIDEO/AUDIO Extender and
one CAT.5 cable.
ƒ Equalization length is adjustable.
ƒ VGA signal gain is adjustable.
ƒ Audio sample rate 96KHz.
ƒ Can use external microphone to output sounds to
audio amplifier.
Specifications
Function WAV-LJ WAV-RJ
VGA In/Out Connector HD-15 Female x 2
Audio In/Out Connector 3.5
ψ
Stereo Jack x 1
Cable Connector RJ-45 Female
Max. Resolution 1280x1024 60Hz
Cable Distance 300 m (Max.)
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 169 g 172 g
Dimensions (LxWxH) 78.2x41.2x52.8 mm
LOCAL FRONT VIEW
1. VGA Input (HD-15 Female Connector)
2. Audio Input
3. MIC Input
4. MIC GAIN – adjust volume of microphone
5. Power LED
-1-
6. Control H/V signal inverting switch
The default setting of SW1 is “OFF”. If SW1 is set to
“ON”, the H signal is inverting output.
The default setting of SW1 is “OFF”. If SW2 is set to
“ON”, the V signal is inverting output.
If the local end changes the logic with the H/V signal
or the logic of the H/V signal, please use then this
function.
LOCAL REAR VIEW
1. Power Connector
2. RJ-45 Connector
REMOTE FRONT VIEW
1. VGA Output (HD-15 Female Connector)
2. Audio Output
3. EQ – Equalization length adjust (Adjust it and weak
characters be sharp)
4. GAIN – Adjust brightness
5. Power LED
6. Control H/V signal inverting switch
The default setting of SW1 is “OFF”. If SW1 is set to
“ON”, the H signal is inverting output.
The default setting of SW1 is “OFF”. If SW2 is set to
“ON”, the V signal is inverting output.
If the local end changes the logic with the H/V signal
or the logic of the H/V signal, please use then this
function.
-2-