Page
9
of
56
Surface Mount (IR-S Model)
1.
Determine a secure location to mount the camera.
2.
Remove the dome cover from the camera by unscrewing the three captive fasteners.
Figure 1: Remove dome cover
3.
The camera can be mounted two ways: surface mount or via a junction box to a wall or
ceiling.
Choose the best method for your installation below:
a.
Surface Mount
: use the supplied template to mark three desired holes (there
are six holes to choose from; see Figure 3). Then drill the holes with a diameter of 8
mm (0.3 in) and insert the supplied anchors into the holes. Attach the camera
module and supplied gasket securely using the supplied screws.
Figure 3: Drill three of the six holes provided.
