background image

 

2

 

ConteraIP

®

 Omni LX RS Installation Manual  

About Our Warranty 

Global (3 Year) Limited Warranty 

ARECONT VISION COSTAR warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: 

(a) each Product shall be free from material defects in material and workmanship for a period of thirty-six 

(36) months from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the 

Products will materially conform with the specification in the applicable documentation; (c) all licensed 

programs accompanying the Product (the “Licensed Programs”) will materially conform with applicable 

specifications. Notwithstanding the preceding provisions, ARECONT VISION COSTAR shall have no 

obligation or responsibility with respect to any Product that (i) has been modified or altered without 

ARECONT VISION COSTAR’s written authorization; (ii) has not been used in accordance with applicable 

documentation; (iii) has been subjected to unusual stress, neglect, misuse, abuse, improper storage, 

testing or connection; or unauthorized repair; or (iv) is no longer covered under the Warranty Period. 

ARECONT VISION COSTAR MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, 

STATUTORY OR OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY 

ARECONT VISION COSTAR ABOVE, AND ARECONT VISION COSTAR HEREBY SPECIFICALLY 

DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND IMPLIED WARRANTIES AND CONDITIONS, 

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 

PURPOSE, NON-INFRINGEMENT AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. 

ALL LICENSED PROGRAMS ARE LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. 

ARECONT VISION COSTAR DOES NOT WARRANT THAT (I) THE OPERATION OF THE PRODUCTS 

OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE; (II) THE PRODUCTS OR PARTS AND 

DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS; (III) THE PRODUCTS OR 

PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS SELECTED BY THE END 

USER; OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS OR OTHER 

PRODUCTS AUTHORIZED BY ARECONT VISION COSTAR OR (IV) THAT ALL LICENSED PROGRAM 

ERRORS WILL BE CORRECTED.  

 

The ConteraIP

®

 Omni LX Remote Setup (RS) motors are meant to be used for setup purposes or moving 

to preset positions no more than one time per day. Excessive use will void the warranty. This camera is 

not meant to be used as a traditional PTZ (pan tilt zoom) speed dome camera.  

 

For RMA and Advance Replacement information visit http://www.avcostar.com

 

Summary of Contents for ConteraIP AV20476RS



































































Reviews: