Modular Matrix Switcher 16x16
23
4. Button Control
The matrix can be rapidly controlled with its front panel buttons. To switch AV signal,
please operate the buttons under the following format:
Format:
“
Input Channel
” + “
AV
” +“
Output Channel
” + “
Enter
”
Note:
“Input Channel”: Fill with the number of input channel to be controlled,
“Output Channel”: Fill with the number of output channels to be controlled. Press
“All” to select all the outputs.
Use “,” button to separate multiple I/O channels, and press “ENTER” button to
confirm the operation.
The input/output channels on the rear panel are counting from left to right, top to
bottom.
The input delay time between two numbers of every input & output channel must
be less than 5 seconds; otherwise the operation will be cancelled.
Example:
To switch input 1 to output 1, press input “1”, output “1”.
To switch signals from input 1 to all output channels, press buttons in this order: “1”,
“All”.
Other Functional Buttons:
Button
Description
Operation
UNDO
Return to the previous
status.
Status 1: Input 6 -> output 6
Press input “6” + “AV”+ output 4 to
change the connection. Press “Undo” to
return to Status 1.
Backspace the last
operation.
If you press buttons “1”, “AV”, “2”, “
” in
order, then “2” will be canceled.
THROUGH
Get straight I/O connection,
e.g. input 1-> output 1, input
2-> output 2.
Format: “Input Channel” + ”Through”
If you press buttons “ALL”, “THROUGH”
in order, then the result will be like input
1
output 1, input 2
output 2, input
3
output 3 … input 16
output 16.
