AVDT-BOB
User’s manual
v1.6
Page 6 / 25
2.4
Access to AVDT-BOB
’s
User Interface via AVSMonitor on Windows OS
The AVDT-BOB User Interface can be accessed using AVSMonitor on Windows OS:
Download AuviTran AVS-Monitor free software for windows 7/8/10 available at the
following web address http://www.auvitran.com/w4/?page_id=86
Install AVS-Monitor by double clicking on the download file.
Start AVS-Monitor.
The AVDT-BOB connected to the network will automatically appears in 2 lists on left:
▪
“Network controller”
provides access to the AVDT-BOB control
▪
“Dante Network”
give
“Dante” information
on the AVDT-BOB
Select the AVDT-
BOB in the left list called “Network controller”
and” “Control” Tab in
the right windows as describe bellow.
See chapter 3 for interface description.
Notices:
-
If your device
doesn’t appear
, your network configuration is probably not good.
1)
Go to the AVS-Control-Panel using
“Edit/Control panel”
menu or press Ctrl+P
2)
Select a valid network adapter in the
“Dante /
AuviTran Adapter
”
3)
Press the “Turn On” button if the service is off (red LED).
-
The “
Properties Tab
” provides the IP addres
s of the AVDT-
BOB user’s interface
-
You can transfer the control of your device to
your standard browser by a right click on AVDT-
BOB name in the Network list and selected
“
Open on new window
”
-
For more information on
AVSMonitor read its “User’s manual”
