AVDT-BOB
User’s manual
v1.6
Page 17 / 25
4.5.2
Limiter/Compressor view
The
“
DYN
”
processing interface manages the limiter compressor parameters
The first fader controls the Gate level of the processing (mutes the sound when the
signal is too weak)
The 2
nd
fader or the [
Red-Square
] button position controls the compression
threshold
The 3
rd
fader controls compression ratio
The 4
th
fader controls the Limiter level
The 3 right faders enable to set the Attack/Hold/Release parameters
✓
Attack: attack time in ms
✓
Hold: sets the time the gate will remain open after the signal has fallen below the
threshold.
✓
Release: return time in ms
[
On/Off
] button activates/bypass the Limiter/compressor processing without
modifying the parameters
[
Soft knee
] button activates/disables the soft knee of the compression
[
Reset
] button reset all limiter/compressor processing parameters
[
Cancel
] button cancel all modifications and return to previous parameters
4.6
Parameter interface
The parameter icon give access to software settings, information and Load/Save sub menus
via 4 parameters tabs [
General
], [
Network
], [
Save/Load
], [
GPIO
]
1
2
3
4
5
6
7
8
9
