AS-2300TW
Guide d’installation
P. 3
•
•
Pressing and holding the
LOCK
button for more than 3 seconds will lock all doors and will send a
constant pulse as long as the
LOCK
button is held down (maximum of 15 seconds). This
constant pulse can be configured to activate certain functionalities such as rolling up the
windows – Please refer to your installer to see if your vehicle is compatible with this
option.
Pressing and holding the
UNLOCK
button for more than 3 seconds will unlock all doors and will
send a constant pulse as long as the
UNLOCK
button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling down the
windows – Please refer to your installer to see if your vehicle is compatible with this
option.
Feature Confirmation Chart
Feature
LED #1
LED #2
LED #3
LED #4
Beep(s)
Lock 3
flashes X
X
X
1
Unlock X 3
flashes X
X
2
Trunk X X
3
flashes
X 1
LED ON/OFF
3 flashes
3 flashes
X
X
1
Start X X X
3
flashes
1
Running X X X
3
flashes
3
Stop X X X
3
flashes
2
Entering Cold
Weather Mode
X X X
3
flashes
2
Exiting Cold
Weather Mode
X X X
3
flashes
1
Home Valet
3 flashes
X
X
3 flashes
2
Valet Mode
3 flashes
X
X
3 flashes
1
Exit
ValetMode X 3
flashes X 3
flashes 1
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle
i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
SHIFT
button then press and release the
TRUNK
button (there will be a beep).
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle’s
status.
x
If the engine is NOT running, refer to Table 1.
x
If the engine IS running under a remote start, refer to Table 2 (if the doors are locked)
or refer to Table 3 (if the doors are unlocked).
The status request feature is a two-step procedure:
•
The first sequence of flashes denotes if the vehicle’s doors are locked or unlocked.
