Chapter 5:
Configuring IntelliSight Devices
Autoscope IntelliSight User Guide
©2022 Image Sensing Systems Inc.
5-4
IntelliSight Processor Setup
To configure the IntelliSight Processor, do the following.
1. Start the Supervisor.
2. On the Home screen, click the device icon for the IntelliSight Processor to be
configured.
The following appears.
An image of all setup cameras will appear if the cameras are connected and
online; one in each of the four quadrants of the image area. The order of
appearance is determined by the order in which the cameras were added.
The first camera will display in the upper left; second in upper right; third in
lower left; fourth in lower right.
If needed, use the video controls to refresh the images.
3. In the Navigation section, click
Device Settings
.
