Chapter 5:
Configuring IntelliSight Devices
Autoscope IntelliSight User Guide
©2022 Image Sensing Systems Inc.
5-3
Program Settings
The following defines parameters that are used by the Supervisor, regardless of
the connected devices.
1. In the Commands section of the Supervisor Home screen, click
Program
Settings
.
NOTE:
At present, English is the only supported language.
2. Select the measurement units for distances.
•
English
– translates all distance measurements into feet.
•
Metric
– translates all distance measurements into meters.
3. For
Naming Scheme
, select the scheme to be used for the heading names of
the four description fields. If
Custom
is selected, enter a name for each of
the four descriptions.
4. When finished, return to the Home screen and perform the setup for each
device.
