ColorMFA Manual, firmware v2.9.4_b31
4
Messages display area
If there are errors or warnings diagnosed by ColorMFA in the car, the icons are displayed
in the message display area reminding the user of present faults or warnings. By default, the
icons flash, so that the user pays attention to presence of errors or warnings. Blinking can be
switched off in the settings (
In the absence of any errors and no warnings there is "OK" displayed in this area.
Bottom display area
In the center of the bottom display area, the current transmission gear or the operating
mode of the gearbox is displayed. Indications of proper gear number is available for manual
gearbox when the transmission ratio values are correctly specified in the settings (
tings -> Calibration -> Gear ratios
) and for the automatic gearbox. For the automatic gearbox,
you can select the display mode (
Menu -> Settings -> Gearing assist.
).
If the automatic transmission has faults (errors), the data is highlighted in red and
flashes to attract attention.
Parameters on the left and on the right side of this area can be configured in
Settings -> Design -> Main screen
.
For cars equipped with a gearbox with a low range option, the low range and emergency
/ warning mode is displayed. Turning on the lowered range gearing is indicated by an ordinary
inscription. In case of a malfunction or an unacceptable mode of operation, the inscription blinks.
