ColorMFA Manual, firmware v2.9.4_b31
13
Settings
Speed Limiter
In the "Speed Limiter" screen, you can set up the warning parameters for the speed limit.
You can enable / disable the alert, enable the sound alert and set up the speed at which the
alarm is displayed.
The alarm is displayed on the main screen in the form of a flashing symbol indicating the
speed of restriction.
When the alarm is displayed, you can remove it from the screen by pressing the
"Reset"
button or by lowering the speed below the specified value. The alarm for exceeding speed limit
will appear constantly if enabled in the menu and if the speed is great than specified (selected)
limit.
ECO mode
ECO mode is for reference only and does not affect the operation
of the car. The screen "ECO mode" should be set to a fuel consumption
value which would reflect driving in an economical manner.
Within a few seconds of vehicle motion and fuel flow rate is below the
specified value, a green backlight appears on the main screen around the
transmission gear indicator. This illumination represents that the current
driving mode is economical and that fuel efficiency is above the specified
consumption rate. The display operates at speeds above 20 km / h.
