Autonomous SmartDesk Core Duo Assembly Instructions Download Page 1

Page: 1 / 3

1a. Loosen 4 x (M) Screws of Support Beam (I) using 4mm Allen Wrench, then fully extended the

beam.

2. Attach 2 x Connection Beams (B) to the legs as shown. Place 8 x (Z1) Gaskets on 8 x (V)

Screws, then use them to secure the 2 x Connection Beams (B) in place with the 5mm Allen

Wrench.

1b. Place Support Beam (I) over Legs (A1 + A2). Attach with 8 x (W) Screws. Repeat this step with

the other support beam.

Heads up

The 4(M) are

already

attached into

the beam

Make sure

connectors

are facing the

same side.

Assemble other

Support Beam

following the

same steps.

SmartDesk Core Duo

Summary of Contents for SmartDesk Core Duo

Page 1: ...x V Screws then use them to secure the 2 x Connection Beams B in place with the 5mm Allen Wrench 1b Place Support Beam I over Legs A1 A2 Attach with 8 x W Screws Repeat this step with the other suppor...

Page 2: ...both Connection Beams I 6a Attach 2 x Brackets D to each Support Beam I using 4 x Screws W and 4mm Allen Wrench 6b Place 4 x Support Pads Z on each Bracket D and 2 x Support Pads Z on each Support Bea...

Page 3: ...x Y1 Screws 9b Attach Control Box F beneath Desk Top using 2 Y Repeat process with the Desk on the other side Or you can place each Control Box F onto the corresponding Cable Tray L 10 Plug each Cont...