Autonics LP-A Series User Manual Download Page 47

Page: 47 / 106

4 Operating LP

© Copyright Reserved Autonics Co., Ltd.

Operating LP

Describes the operation procedure form when the power is supplied on LP to when the user

screen displays.

4.1

Power Supplying Checklist

Please chec the following list belowm before supplying the power on LP.

No Checklist

Description

Installation

status

Check all the mounting brackets are properly installed.

LP-A070: 4, LP-A104: 6
Check the mounting brackets are tightened with appropriate torque and

solid state

Ground

Check the ground is separated from other devices.
Check the 3rd grounding.

Power cable

Check the wiring connections for polarity.
Check the terminal screw tightness.

Power

Check the power supply voltage within rated range.
Check the power is installed separately from other devices.

Summary of Contents for LP-A Series











































































































Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands

Autonics LP-A Series, User Manual

Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands