SAVe II+ OPERATOR’S MANUAL > Page 13
F
RONT
P
ANEL
Device controls, indicators and displays are located on the front panel of the device
and are organized based on task for rapid setup and troubleshooting.
The device is controlled using membrane buttons. Except for POWER ON/OFF, MUTE
and MANUAL TRIGGER, control changes require confirmation to prevent inadvertent
changes to device settings. Parameter adjustments require operators to select (press)
the appropriate HEIGHT PRESET or the +/- parameter control buttons until the desired
setting is reached then press CONFIRM. The parameter display will blink with the
prospective setting for 10 seconds or until the CONFIRM button is pressed. If not
confirmed, the device will revert to the current device setting and the numerical
parameter displays will turn solid.
Figure 2: Front Panel