AutomationDirect ProSense DPM3-E Series, User Manual

Page: 19 / 27

DPM3-E Electrical User Manual, 1st Edition
User Manual - DPM3-E Series Electrical Panel Meters
19
Table of programmable functions
• Nº: Number to select the function.
• Function: Function name.
•
Description:
Description and characteristics of the function.
• Activation by:
Falling edge: the function is activated applying a falling edge to the
corresponding pin with respect to common.
Low level: the function will remain activated as long as the corresponding
pin is held at a low level.
No. Function Description Activation By
0
Deactivated None None
1
Deactivated None None
2
Deactivated None None
3
PEAK Displays the peak value. (MAX.) Low level
4
VALLEY Displays the valley value. (MIN) Low level
5
RESET PEAK/VALLEY
Perform a reset of the peak or the valley, depending on which is being
displayed.
Falling edge
6
HOLD Freeze the display while all the outputs remain active Low level
7
Deactivated None None
8
Deactivated None None
9
Deactivated None None
10
Deactivated None None
11
BRIGHTNESS Change the display brightness from Hi to Low Low level
12
SETPOINT VALUE Displays the selected setpoint value (see diagram next page) Low level
13
False Setpoints Simulates that the instrument has a four setpoints option installed Low level
14
Deactivated None None
15
Deactivated None None
16
Remote keypad The three logic inputs act as a remote keypad* Edge
* It’s mandatory programming the 3 logical inputs with function 16