DPM3-E Electrical User Manual, 1st Edition
User Manual - DPM3-E Series Electrical Panel Meters
13
will be able to take a value in the range -19999 to 19999, without taking into account the
decimal point. In these case the first digit shows 0, 1, -1, 2, 3 or -.
Completion of each submenu routine returns the meter to
Pro
mode. To save data entered or
changed during configuration press the
ENTER
key while in
Pro
mode.
StorE
will be displayed
for a few seconds while all of the configuration data is stored in memory. The meter will then
return to
RUN
mode.
Input Configuration
The figure below shows the input configuration menu. Divided into four submenus, each one
of them separated by the dotted line in the manual, each menu corresponds to the programming
of the different types of input: Volt dc, Volt ac, Amp dc, Amp ac. Once the type of signal has
been selected you have then to select the range. Usually the 100, 60, 50mV (nU) ranges are
shunts signals. .
ENTER:
Vertical displacement.
UP:
Changes active digit.
SHIFT:
Horizontal displacement.
Programming Keys
(Bottom view)
CnInP
U-dC
U-AC
A-dC
A-AC
600 U
PRO
200 U
20 U
2 U
5 A
1 A
0.2A
100nU
60nU
50nU
