Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–20
Chapter 1: Getting Started
Step 6: Verify Hardware Configuration
Next, you will need to verify the hardware configuration for accuracy. The Do-more T1H
Series PLC has an auto discover feature that will automatically detect the I/O modules
installed. You can see the results of this search by selecting PLC > System Configuration,
double clicking the CPU link under the Configuration tab in the Project Browser, or by
clicking the XY Configure icon in the Project Toolbar.
On the left side of the System Configuration window is an index of topics titled
Configuration Entries. Click the I/O Configuration tab and you should see an overview of
the modules that the software located, similar to the following.
From here you can verify that the software has detected all of the I/O modules that are
installed.
